Plug-in Sensors

TEF 14

APPLICATIONS

Plug-in sensors are ideal for all possible application of temperature measuring. They are available as straight and right-angle design. There are clamp-screws, screws, clips and stop rings available for mounting. Springs with special-fiberglass hose and 400°C heat resistant varnish are standard. Furthermore are PVC-PFA-fiberglass thermo and compensating wires as well as fiberglass with metal braided meshing available. The diameters are reduced from Ø 10 x 2 mm down to Ø 8 x 2 mm and Ø 4 x 6 mm underneath the holding stirrup of the sensor tip. The TEF 14 sensor is out of 1.4301 stainless steel. Standard measure surface is plane. A plane measure surface is standard.

operating temperature: up to 400 °C
sensor tip:
Ø 8 x 12 mm – 110°
isolated or non-isolated
as single or double element
fastening due to retaining clip
Ø 8 x 65 mm anti-kink protection spring

up to 400°C
operating temperature
Ø 8 x 12 mm
sensor tip - 110°
Ø 8 x 65 mm
anti-kink protection spring

TEF 14 Plug-in Sensor

Please find following our standard thermo and compensating wires for TEF 14 thermocouples listed. Others are available on request.

Fe-CuNi type L

part#	cross section	temperature range	outer diameter
1307289	2x0,22 mm²	-40 °C up to +180 °C	4,00 mm ± 0,10 mm
1200456	4x0,22 mm²	-50 °C up to +400 °C	3,80 mm max.
1200464	2x1,00 mm²	-50 °C up to +400 °C	approx. 4,50 mm
1200465	2x1,00 mm²	-50 °C up to +400 °C	approx. 4,50 mm
1256523	2x1,00 mm²	-50°C up to +500 °C	approx. 4,50 x 2,60 mm
2239027	2x1,00 mm²	-90°C up to +650 °C	approx. 5,00 x 3,20 mm

Fe-CuNi type J

part#	cross section	temperature range	outer diameter
1229818	4x0,22 mm²	-50 °C up to +400 °C	approx. 3,60 mm
1201349	2x1,00 mm²	-50 °C up to +500 °C	4,60 mm max.

NiCr-Ni type K

part#	cross section	temperature range	outer diameter
1298584	4x0,22 mm²	-50 °C up to +400 °C	4,00 mm max.
1200473	2x1,00 mm²	-50 °C up to +400 °C	approx. 4,50 mm