Surface Mounting/Tool Sensors
Surface Mounting/Tool Sensors are for measuring round or plane surfaces. There is an Ø 3.5 mm hole between the TEF 13 sensor ring and Ø 7 mm holding shaft where the Ø 3.5 x 30 mm thermocouple is inserted and soldered. The measure surface is grinded plane. A M4 screw serves as central fastening. The passage of compensating wire and protection tube is 7 mm conical strain relieved. Anti-kink protections are selectable. Ø 6 x 100 mm springs or special fiberglass hose with heat resistant varnish are standard.
Please find following our standard thermo and compensating wires for TEF 13 thermocouples listed. Others are available on request.
Fe-CuNi type L
| part# | cross section | temperature range | outer diameter |
| 1200455 | 2x0,22 mm² | -50 °C up to +400 °C | approx. 3,40 mm |
| 1307289 | 2x0,22 mm² | -40 °C up to +180 °C | 4,00 mm ± 0,10 mm |
Fe-CuNi type J
| part# | cross section | temperature range | outer diameter |
| 1222528 | 2x0,35 mm² | -50 °C up to +400 °C | approx. 3,40 mm |
| 2239028 | 2x0,35 mm² | -40 °C up to +180 °C | approx. 3,40 mm |
NiCr-Ni type K
| part# | cross section | temperature range | outer diameter |
| 1200471 | 2x0,50 mm² | -50 °C up to +400 °C | approx. 3,50 mm |
Miniature - round plugs with screw connection
| 3-pin | plug | T3260 | part# 1201415 |
| socket | T3261 | part# 1200722 |
| 4-pin | plug | T3300 | part# 1103624 |
| socket | T3301 | part# 1200723 |
Thermocouple plug connectors
| J type | plug | A9.1 | part# 1107127 |
| socket | A10.1 | part# 1107128 | |
| with cross section | 2x0,50 mm² | part# 1349300 |
| K type | plug | A9.2 | part# 1209136 |
| socket | A10.2 | part# 1134620 | |
| with cross section | 2x0,50 mm² | part# 1349300 |
Miniature plug connectors
| Lemo | cable Ø max. in mm | ||||
| sizes | 0S | 1S | 2S | 3S | |
| standard socket | 3,7 | 4,2 | 4,2 | 4,2 | |
| fitting socket | |||||
| standard plug | 3,7 | 4,2 | 4,2 | 4,2 |
Any
questions?
Find your contact person in one of our locations!
